Configuring the RSLinx Ethernet Driver Ethernet is much faster than DF1. The DF1 Driver defaults to 19,200 baud (bits per second), but Ethernet will run up to 100 Million baud. Ethernet communications is usually the preferred method in Industry, but you must use caution to prevent someone from the Read More »
Configuring the RSLinx DF1 Driver In this section, we’ll set up the RSLinx DF1 Driver. Communications is very important in Industrial Automation. If you cannot communicate, you cannot go online to troubleshoot or change the program in your system. This document will guide you through Configuring the DF1 Read More »
Introduction to the ControlLogix Processor The ControlLogix Processor is the controller of an automation system. This is where we store the program that automates industrial systems. Although we can place the ControlLogix processsor in any slot of the chassis, traditionally we place it in Slot 0. We program Read More »
