{"id":2590,"date":"2020-08-12T13:20:07","date_gmt":"2020-08-12T13:20:07","guid":{"rendered":"http:\/\/bryceautomation.com\/?p=2590"},"modified":"2020-11-15T16:37:56","modified_gmt":"2020-11-15T16:37:56","slug":"plantpax-4-1-interlocks","status":"publish","type":"post","link":"https:\/\/bryceautomation.com\/index.php\/2020\/08\/12\/plantpax-4-1-interlocks\/","title":{"rendered":"PlantPAx 4 Interlocks"},"content":{"rendered":"\n<h3 class=\"wp-block-heading\">Introduction to PlantPAx 4 Interlocks<\/h3>\n\n\n\n<p>With PlantPAx 4 Interlocks, if any condition changes on our equipment, we might shut off an output.  For example, if a lube pump shuts off, you might shut off an output for a motor.  We might also interlock valves, so we cannot energize the open and close solenoids at the same time.   With this in mind, don&#8217;t confuse Interlocks with Permissives.   Permissives typically allow and output to energize in the first place.  In contrast, and Interlock will typically shut off an output under certain conditions.<\/p><div id=\"bryce-1968979683\" class=\"bryce-afterfirst bryce-entity-placement\"><script async src=\"\/\/pagead2.googlesyndication.com\/pagead\/js\/adsbygoogle.js?client=ca-pub-8316758073402323\" crossorigin=\"anonymous\"><\/script><ins class=\"adsbygoogle\" style=\"display:block;\" data-ad-client=\"ca-pub-8316758073402323\" \ndata-ad-slot=\"7728240895\" \ndata-ad-format=\"auto\"><\/ins>\n<script> \n(adsbygoogle = window.adsbygoogle || []).push({}); \n<\/script>\n<\/div>\n\n\n\n<h3 class=\"wp-block-heading\">Interlocks in Logic<\/h3>\n\n\n\n<p>Take the case of an output instruction.  Notice that we have two inputs to this instruction for Interlocks.   One input tells us the interlock is OK.    Likewise, we have another input that tells us the Non-Bypassable interlocks are OK.  The operator can bypass certain interlocks if we allow them.<\/p>\n\n\n\n<figure class=\"wp-block-image size-large\"><img decoding=\"async\" width=\"643\" height=\"460\" data-src=\"https:\/\/bryceautomation.com\/wp-content\/uploads\/2020\/08\/doutinterlocks.png\" alt=\"\" class=\"wp-image-2591 lazyload\" data-srcset=\"https:\/\/bryceautomation.com\/wp-content\/uploads\/2020\/08\/doutinterlocks.png 643w, https:\/\/bryceautomation.com\/wp-content\/uploads\/2020\/08\/doutinterlocks-300x215.png 300w\" data-sizes=\"(max-width: 643px) 100vw, 643px\" src=\"data:image\/svg+xml;base64,PHN2ZyB3aWR0aD0iMSIgaGVpZ2h0PSIxIiB4bWxucz0iaHR0cDovL3d3dy53My5vcmcvMjAwMC9zdmciPjwvc3ZnPg==\" style=\"--smush-placeholder-width: 643px; --smush-placeholder-aspect-ratio: 643\/460;\" \/><\/figure>\n\n\n\n<h4 class=\"wp-block-heading\">Import the interlock add-on instructions<\/h4>\n\n\n\n<p>In order to use Interlocks in logic, first we need to import the P_Intlk Add-On Instruction.  Right click the Add-On instructions in your controller organizer window.   Choose to &#8220;Import Add-On Instruction&#8221;  <\/p>\n\n\n\n<figure class=\"wp-block-image size-large\"><img decoding=\"async\" width=\"415\" height=\"87\" data-src=\"https:\/\/bryceautomation.com\/wp-content\/uploads\/2020\/08\/addon-1.png\" alt=\"\" class=\"wp-image-2542 lazyload\" data-srcset=\"https:\/\/bryceautomation.com\/wp-content\/uploads\/2020\/08\/addon-1.png 415w, https:\/\/bryceautomation.com\/wp-content\/uploads\/2020\/08\/addon-1-300x63.png 300w\" data-sizes=\"(max-width: 415px) 100vw, 415px\" src=\"data:image\/svg+xml;base64,PHN2ZyB3aWR0aD0iMSIgaGVpZ2h0PSIxIiB4bWxucz0iaHR0cDovL3d3dy53My5vcmcvMjAwMC9zdmciPjwvc3ZnPg==\" style=\"--smush-placeholder-width: 415px; --smush-placeholder-aspect-ratio: 415\/87;\" \/><\/figure>\n\n\n\n<p>Choose the P_Intlk Instrcution, and click open.   At this time, we&#8217;ll just leave the settings all at default.<\/p>\n\n\n\n<figure class=\"wp-block-image size-large\"><img decoding=\"async\" width=\"864\" height=\"576\" data-src=\"https:\/\/bryceautomation.com\/wp-content\/uploads\/2020\/08\/interlockimport.png\" alt=\"\" class=\"wp-image-2592 lazyload\" data-srcset=\"https:\/\/bryceautomation.com\/wp-content\/uploads\/2020\/08\/interlockimport.png 864w, https:\/\/bryceautomation.com\/wp-content\/uploads\/2020\/08\/interlockimport-300x200.png 300w, https:\/\/bryceautomation.com\/wp-content\/uploads\/2020\/08\/interlockimport-768x512.png 768w\" data-sizes=\"(max-width: 864px) 100vw, 864px\" src=\"data:image\/svg+xml;base64,PHN2ZyB3aWR0aD0iMSIgaGVpZ2h0PSIxIiB4bWxucz0iaHR0cDovL3d3dy53My5vcmcvMjAwMC9zdmciPjwvc3ZnPg==\" style=\"--smush-placeholder-width: 864px; --smush-placeholder-aspect-ratio: 864\/576;\" \/><\/figure>\n\n\n\n<p>Create a new sheet, and label this sheet as &#8220;Interlocks&#8221;.<\/p>\n\n\n\n<figure class=\"wp-block-image size-large\"><img decoding=\"async\" width=\"441\" height=\"247\" data-src=\"https:\/\/bryceautomation.com\/wp-content\/uploads\/2020\/08\/newsheet.png\" alt=\"\" class=\"wp-image-2593 lazyload\" data-srcset=\"https:\/\/bryceautomation.com\/wp-content\/uploads\/2020\/08\/newsheet.png 441w, https:\/\/bryceautomation.com\/wp-content\/uploads\/2020\/08\/newsheet-300x168.png 300w\" data-sizes=\"(max-width: 441px) 100vw, 441px\" src=\"data:image\/svg+xml;base64,PHN2ZyB3aWR0aD0iMSIgaGVpZ2h0PSIxIiB4bWxucz0iaHR0cDovL3d3dy53My5vcmcvMjAwMC9zdmciPjwvc3ZnPg==\" style=\"--smush-placeholder-width: 441px; --smush-placeholder-aspect-ratio: 441\/247;\" \/><\/figure>\n\n\n\n<p>The name of the sheet is in your upper right hand corner of the Function Block editor.<\/p>\n\n\n\n<figure class=\"wp-block-image size-large\"><img decoding=\"async\" width=\"443\" height=\"97\" data-src=\"https:\/\/bryceautomation.com\/wp-content\/uploads\/2020\/08\/sheetname.png\" alt=\"\" class=\"wp-image-2594 lazyload\" data-srcset=\"https:\/\/bryceautomation.com\/wp-content\/uploads\/2020\/08\/sheetname.png 443w, https:\/\/bryceautomation.com\/wp-content\/uploads\/2020\/08\/sheetname-300x66.png 300w\" data-sizes=\"(max-width: 443px) 100vw, 443px\" src=\"data:image\/svg+xml;base64,PHN2ZyB3aWR0aD0iMSIgaGVpZ2h0PSIxIiB4bWxucz0iaHR0cDovL3d3dy53My5vcmcvMjAwMC9zdmciPjwvc3ZnPg==\" style=\"--smush-placeholder-width: 443px; --smush-placeholder-aspect-ratio: 443\/97;\" \/><\/figure>\n\n\n\n<p>At this time, add the logic for your Interlock.   In this case, I&#8217;m just using discrete switches.   These switches represent field devices you will find on an actual project.  You will need the P_Intlk instructions, three Input References, and 2 Output Wire Connectors.  Your output connectors will not verify yet.  At this point, we have not yet set up the input connectors.  Most important:  You MUST change the name of the tag for the P_Intlk instruction.  In order for PlantPAx to find the interlock, it must have the exact same name as the instruction it is tied to followed by &#8220;_Intlk&#8221;.<\/p>\n\n\n\n<figure class=\"wp-block-image size-large\"><img decoding=\"async\" width=\"756\" height=\"445\" data-src=\"https:\/\/bryceautomation.com\/wp-content\/uploads\/2020\/08\/InterlockLogic-4.png\" alt=\"\" class=\"wp-image-2601 lazyload\" data-srcset=\"https:\/\/bryceautomation.com\/wp-content\/uploads\/2020\/08\/InterlockLogic-4.png 756w, https:\/\/bryceautomation.com\/wp-content\/uploads\/2020\/08\/InterlockLogic-4-300x177.png 300w\" data-sizes=\"(max-width: 756px) 100vw, 756px\" src=\"data:image\/svg+xml;base64,PHN2ZyB3aWR0aD0iMSIgaGVpZ2h0PSIxIiB4bWxucz0iaHR0cDovL3d3dy53My5vcmcvMjAwMC9zdmciPjwvc3ZnPg==\" style=\"--smush-placeholder-width: 756px; --smush-placeholder-aspect-ratio: 756\/445;\" \/><\/figure>\n\n\n\n<p>Back on sheet 1, add your Input Connectors into the P_Dout instruction.<\/p>\n\n\n\n<figure class=\"wp-block-image size-large\"><img decoding=\"async\" width=\"643\" height=\"449\" data-src=\"https:\/\/bryceautomation.com\/wp-content\/uploads\/2020\/08\/image.png\" alt=\"\" class=\"wp-image-2597 lazyload\" data-srcset=\"https:\/\/bryceautomation.com\/wp-content\/uploads\/2020\/08\/image.png 643w, https:\/\/bryceautomation.com\/wp-content\/uploads\/2020\/08\/image-300x209.png 300w\" data-sizes=\"(max-width: 643px) 100vw, 643px\" src=\"data:image\/svg+xml;base64,PHN2ZyB3aWR0aD0iMSIgaGVpZ2h0PSIxIiB4bWxucz0iaHR0cDovL3d3dy53My5vcmcvMjAwMC9zdmciPjwvc3ZnPg==\" style=\"--smush-placeholder-width: 643px; --smush-placeholder-aspect-ratio: 643\/449;\" \/><\/figure>\n\n\n\n<p>Download your work to the processor, and go to Remote Run mode.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">Add the P_Intlk faceplates<\/h3>\n\n\n\n<p>Our next step is to add the displays.  In order to do this, right click &#8220;Displays&#8221; under &#8220;Graphics&#8221;, and Import component into application.  Import the P_Intlk-faceplate, and P_Intlk-Advanced.<\/p>\n\n\n\n<figure class=\"wp-block-image size-large\"><img decoding=\"async\" width=\"1024\" height=\"576\" data-src=\"https:\/\/bryceautomation.com\/wp-content\/uploads\/2020\/08\/importhmifaceplate-1-1024x576.png\" alt=\"\" class=\"wp-image-2613 lazyload\" data-srcset=\"https:\/\/bryceautomation.com\/wp-content\/uploads\/2020\/08\/importhmifaceplate-1-1024x576.png 1024w, https:\/\/bryceautomation.com\/wp-content\/uploads\/2020\/08\/importhmifaceplate-1-300x169.png 300w, https:\/\/bryceautomation.com\/wp-content\/uploads\/2020\/08\/importhmifaceplate-1-768x432.png 768w, https:\/\/bryceautomation.com\/wp-content\/uploads\/2020\/08\/importhmifaceplate-1.png 1047w\" data-sizes=\"(max-width: 1024px) 100vw, 1024px\" src=\"data:image\/svg+xml;base64,PHN2ZyB3aWR0aD0iMSIgaGVpZ2h0PSIxIiB4bWxucz0iaHR0cDovL3d3dy53My5vcmcvMjAwMC9zdmciPjwvc3ZnPg==\" style=\"--smush-placeholder-width: 1024px; --smush-placeholder-aspect-ratio: 1024\/576;\" \/><\/figure>\n\n\n\n<p>That&#8217;s all we need to do!   Now launch the client.<\/p>\n\n\n\n<figure class=\"wp-block-image size-large\"><img decoding=\"async\" width=\"423\" height=\"82\" data-src=\"https:\/\/bryceautomation.com\/wp-content\/uploads\/2020\/08\/launchclient.png\" alt=\"\" class=\"wp-image-2550 lazyload\" data-srcset=\"https:\/\/bryceautomation.com\/wp-content\/uploads\/2020\/08\/launchclient.png 423w, https:\/\/bryceautomation.com\/wp-content\/uploads\/2020\/08\/launchclient-300x58.png 300w\" data-sizes=\"(max-width: 423px) 100vw, 423px\" src=\"data:image\/svg+xml;base64,PHN2ZyB3aWR0aD0iMSIgaGVpZ2h0PSIxIiB4bWxucz0iaHR0cDovL3d3dy53My5vcmcvMjAwMC9zdmciPjwvc3ZnPg==\" style=\"--smush-placeholder-width: 423px; --smush-placeholder-aspect-ratio: 423\/82;\" \/><\/figure>\n\n\n\n<h4 class=\"wp-block-heading\">Using the Faceplates<\/h4>\n\n\n\n<p>When an Interlock is not made, you will see a &#8220;Stop Sign&#8221; on the output object.  <\/p>\n\n\n\n<figure class=\"wp-block-image size-large\"><img decoding=\"async\" width=\"142\" height=\"74\" data-src=\"https:\/\/bryceautomation.com\/wp-content\/uploads\/2020\/08\/intlkstop.png\" alt=\"\" class=\"wp-image-2604 lazyload\" src=\"data:image\/svg+xml;base64,PHN2ZyB3aWR0aD0iMSIgaGVpZ2h0PSIxIiB4bWxucz0iaHR0cDovL3d3dy53My5vcmcvMjAwMC9zdmciPjwvc3ZnPg==\" style=\"--smush-placeholder-width: 142px; --smush-placeholder-aspect-ratio: 142\/74;\" \/><\/figure>\n\n\n\n<p>With this in mind, be sure you are logged in, and double click the output object to bring up it&#8217;s faceplate.<\/p>\n\n\n\n<figure class=\"wp-block-image size-large\"><img decoding=\"async\" width=\"427\" height=\"354\" data-src=\"https:\/\/bryceautomation.com\/wp-content\/uploads\/2020\/08\/stopsign-1.png\" alt=\"\" class=\"wp-image-2610 lazyload\" data-srcset=\"https:\/\/bryceautomation.com\/wp-content\/uploads\/2020\/08\/stopsign-1.png 427w, https:\/\/bryceautomation.com\/wp-content\/uploads\/2020\/08\/stopsign-1-300x249.png 300w\" data-sizes=\"(max-width: 427px) 100vw, 427px\" src=\"data:image\/svg+xml;base64,PHN2ZyB3aWR0aD0iMSIgaGVpZ2h0PSIxIiB4bWxucz0iaHR0cDovL3d3dy53My5vcmcvMjAwMC9zdmciPjwvc3ZnPg==\" style=\"--smush-placeholder-width: 427px; --smush-placeholder-aspect-ratio: 427\/354;\" \/><\/figure>\n\n\n\n<p>Notice the &#8220;Stop&#8221; symbol on the diagnostic icon, and on the Interlock icon.   First, let&#8217;s open the diagnostic faceplate.<\/p>\n\n\n\n<figure class=\"wp-block-image size-large\"><img decoding=\"async\" width=\"413\" height=\"345\" data-src=\"https:\/\/bryceautomation.com\/wp-content\/uploads\/2020\/08\/diagnostics.png\" alt=\"\" class=\"wp-image-2606 lazyload\" data-srcset=\"https:\/\/bryceautomation.com\/wp-content\/uploads\/2020\/08\/diagnostics.png 413w, https:\/\/bryceautomation.com\/wp-content\/uploads\/2020\/08\/diagnostics-300x251.png 300w\" data-sizes=\"(max-width: 413px) 100vw, 413px\" src=\"data:image\/svg+xml;base64,PHN2ZyB3aWR0aD0iMSIgaGVpZ2h0PSIxIiB4bWxucz0iaHR0cDovL3d3dy53My5vcmcvMjAwMC9zdmciPjwvc3ZnPg==\" style=\"--smush-placeholder-width: 413px; --smush-placeholder-aspect-ratio: 413\/345;\" \/><\/figure>\n\n\n\n<p>With this in mind, go back to the home screen.  We need to enable navigation to the Interlock faceplate.   Go to &#8220;Maintenance&#8221; then &#8220;Advanced Properties&#8221;.  Then click on the HMI Configuration icon.  Be sure to document the tag name of the P_DOut instruction, and select &#8220;Enable Navigation to Interlock object&#8221;.  You can also change the name of the label on this faceplate.  Be patient when enabling the interlock object.  After you click the checkbox, it will take a few seconds to appear.<\/p>\n\n\n\n<figure class=\"wp-block-image size-large\"><img decoding=\"async\" width=\"507\" height=\"394\" data-src=\"https:\/\/bryceautomation.com\/wp-content\/uploads\/2020\/08\/enableintlknavigation.png\" alt=\"\" class=\"wp-image-2611 lazyload\" data-srcset=\"https:\/\/bryceautomation.com\/wp-content\/uploads\/2020\/08\/enableintlknavigation.png 507w, https:\/\/bryceautomation.com\/wp-content\/uploads\/2020\/08\/enableintlknavigation-300x233.png 300w\" data-sizes=\"(max-width: 507px) 100vw, 507px\" src=\"data:image\/svg+xml;base64,PHN2ZyB3aWR0aD0iMSIgaGVpZ2h0PSIxIiB4bWxucz0iaHR0cDovL3d3dy53My5vcmcvMjAwMC9zdmciPjwvc3ZnPg==\" style=\"--smush-placeholder-width: 507px; --smush-placeholder-aspect-ratio: 507\/394;\" \/><\/figure>\n\n\n\n<p>Next, go back to the Home screen.  Open the Interlock object, then go to Maintenance.  Finally, on the &#8220;Display Advanced Properties&#8221; screen, change the labels on the Interlocks.   At this time, you will also allow a bypass for any interlocks that are bypassable or must be reset.  You can also set the &#8220;OK&#8221; state to 0 or 1.<\/p>\n\n\n\n<figure class=\"wp-block-image size-large\"><img decoding=\"async\" width=\"851\" height=\"350\" data-src=\"https:\/\/bryceautomation.com\/wp-content\/uploads\/2020\/08\/adjustdescriptions.png\" alt=\"\" class=\"wp-image-2615 lazyload\" data-srcset=\"https:\/\/bryceautomation.com\/wp-content\/uploads\/2020\/08\/adjustdescriptions.png 851w, https:\/\/bryceautomation.com\/wp-content\/uploads\/2020\/08\/adjustdescriptions-300x123.png 300w, https:\/\/bryceautomation.com\/wp-content\/uploads\/2020\/08\/adjustdescriptions-768x316.png 768w\" data-sizes=\"(max-width: 851px) 100vw, 851px\" src=\"data:image\/svg+xml;base64,PHN2ZyB3aWR0aD0iMSIgaGVpZ2h0PSIxIiB4bWxucz0iaHR0cDovL3d3dy53My5vcmcvMjAwMC9zdmciPjwvc3ZnPg==\" style=\"--smush-placeholder-width: 851px; --smush-placeholder-aspect-ratio: 851\/350;\" \/><\/figure>\n\n\n\n<p>At this point, go to the HMI Configuration tab.   Document the name of the Interlock tag, and allow navigation to any input objects.   If you allow navigation to Input objects, you must specify the tag for that object.<\/p>\n\n\n\n<figure class=\"wp-block-image size-large\"><img decoding=\"async\" width=\"369\" height=\"493\" data-src=\"https:\/\/bryceautomation.com\/wp-content\/uploads\/2020\/08\/hmisettings.png\" alt=\"\" class=\"wp-image-2616 lazyload\" data-srcset=\"https:\/\/bryceautomation.com\/wp-content\/uploads\/2020\/08\/hmisettings.png 369w, https:\/\/bryceautomation.com\/wp-content\/uploads\/2020\/08\/hmisettings-225x300.png 225w\" data-sizes=\"(max-width: 369px) 100vw, 369px\" src=\"data:image\/svg+xml;base64,PHN2ZyB3aWR0aD0iMSIgaGVpZ2h0PSIxIiB4bWxucz0iaHR0cDovL3d3dy53My5vcmcvMjAwMC9zdmciPjwvc3ZnPg==\" style=\"--smush-placeholder-width: 369px; --smush-placeholder-aspect-ratio: 369\/493;\" \/><\/figure>\n\n\n\n<p>For more information, visit the <a href=\"https:\/\/bryceautomation.com\/index.php\/category\/plantpax\/\">PlantPAx category page.<\/a><\/p>\n\n\n\n<p>&#8212; Ricky Bryce<\/p>\n<div id=\"bryce-3827550606\" class=\"bryce-after-content bryce-entity-placement\"><script async src=\"\/\/pagead2.googlesyndication.com\/pagead\/js\/adsbygoogle.js?client=ca-pub-8316758073402323\" crossorigin=\"anonymous\"><\/script><ins class=\"adsbygoogle\" style=\"display:block;\" data-ad-client=\"ca-pub-8316758073402323\" \ndata-ad-slot=\"4667596182\" \ndata-ad-format=\"auto\"><\/ins>\n<script> \n(adsbygoogle = window.adsbygoogle || []).push({}); \n<\/script>\n<\/div>","protected":false},"excerpt":{"rendered":"<p>Introduction to PlantPAx 4 Interlocks With PlantPAx 4 Interlocks, if any condition changes on our equipment, we might shut off an output. For example, if a lube pump shuts off, you might shut off an output for a motor. We might also interlock valves, so we cannot energize the open and close solenoids at the <a class=\"moretag btn btn-primary\" href=\"https:\/\/bryceautomation.com\/index.php\/2020\/08\/12\/plantpax-4-1-interlocks\/\">Read More \u00bb<\/a><\/p>\n","protected":false},"author":1,"featured_media":2615,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[195],"tags":[202,196],"class_list":{"0":"post-2590","1":"post","2":"type-post","3":"status-publish","4":"format-standard","5":"has-post-thumbnail","7":"category-plantpax","8":"tag-p_intlk","9":"tag-plantpax","10":"czr-hentry"},"yoast_head":"<!-- This site is optimized with the Yoast SEO plugin v27.3 - https:\/\/yoast.com\/product\/yoast-seo-wordpress\/ -->\n<title>PlantPAx 4 Interlocks (P_Intlk Instruction) - Bryce Automation<\/title>\n<meta name=\"description\" content=\"We will add an PlantPAx 4 Interlocks to the ControlLogix processor, the Faceplates in FactoryTalk View SE, and enable navigation.\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/bryceautomation.com\/index.php\/2020\/08\/12\/plantpax-4-1-interlocks\/\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"PlantPAx 4 Interlocks (P_Intlk Instruction) - Bryce Automation\" \/>\n<meta property=\"og:description\" content=\"We will add an PlantPAx 4 Interlocks to the ControlLogix processor, the Faceplates in FactoryTalk View SE, and enable navigation.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/bryceautomation.com\/index.php\/2020\/08\/12\/plantpax-4-1-interlocks\/\" \/>\n<meta property=\"og:site_name\" content=\"Bryce Automation\" \/>\n<meta property=\"article:author\" content=\"https:\/\/www.facebook.com\/ricky.bryce.7\" \/>\n<meta property=\"article:published_time\" content=\"2020-08-12T13:20:07+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2020-11-15T16:37:56+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/bryceautomation.com\/wp-content\/uploads\/2020\/08\/adjustdescriptions.png\" \/>\n\t<meta property=\"og:image:width\" content=\"851\" \/>\n\t<meta property=\"og:image:height\" content=\"350\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/png\" \/>\n<meta name=\"author\" content=\"Ricky\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\\\/\\\/bryceautomation.com\\\/index.php\\\/2020\\\/08\\\/12\\\/plantpax-4-1-interlocks\\\/#article\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/bryceautomation.com\\\/index.php\\\/2020\\\/08\\\/12\\\/plantpax-4-1-interlocks\\\/\"},\"author\":{\"name\":\"Ricky\",\"@id\":\"https:\\\/\\\/bryceautomation.com\\\/#\\\/schema\\\/person\\\/5d5b0f6f6ad768f1ee52968338e63af7\"},\"headline\":\"PlantPAx 4 Interlocks\",\"datePublished\":\"2020-08-12T13:20:07+00:00\",\"dateModified\":\"2020-11-15T16:37:56+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\\\/\\\/bryceautomation.com\\\/index.php\\\/2020\\\/08\\\/12\\\/plantpax-4-1-interlocks\\\/\"},\"wordCount\":649,\"commentCount\":3,\"image\":{\"@id\":\"https:\\\/\\\/bryceautomation.com\\\/index.php\\\/2020\\\/08\\\/12\\\/plantpax-4-1-interlocks\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/bryceautomation.com\\\/wp-content\\\/uploads\\\/2020\\\/08\\\/adjustdescriptions.png\",\"keywords\":[\"P_Intlk\",\"PlantPAx\"],\"articleSection\":[\"PlantPAx\"],\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"CommentAction\",\"name\":\"Comment\",\"target\":[\"https:\\\/\\\/bryceautomation.com\\\/index.php\\\/2020\\\/08\\\/12\\\/plantpax-4-1-interlocks\\\/#respond\"]}]},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/bryceautomation.com\\\/index.php\\\/2020\\\/08\\\/12\\\/plantpax-4-1-interlocks\\\/\",\"url\":\"https:\\\/\\\/bryceautomation.com\\\/index.php\\\/2020\\\/08\\\/12\\\/plantpax-4-1-interlocks\\\/\",\"name\":\"PlantPAx 4 Interlocks (P_Intlk Instruction) - Bryce Automation\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/bryceautomation.com\\\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/bryceautomation.com\\\/index.php\\\/2020\\\/08\\\/12\\\/plantpax-4-1-interlocks\\\/#primaryimage\"},\"image\":{\"@id\":\"https:\\\/\\\/bryceautomation.com\\\/index.php\\\/2020\\\/08\\\/12\\\/plantpax-4-1-interlocks\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/bryceautomation.com\\\/wp-content\\\/uploads\\\/2020\\\/08\\\/adjustdescriptions.png\",\"datePublished\":\"2020-08-12T13:20:07+00:00\",\"dateModified\":\"2020-11-15T16:37:56+00:00\",\"author\":{\"@id\":\"https:\\\/\\\/bryceautomation.com\\\/#\\\/schema\\\/person\\\/5d5b0f6f6ad768f1ee52968338e63af7\"},\"description\":\"We will add an PlantPAx 4 Interlocks to the ControlLogix processor, the Faceplates in FactoryTalk View SE, and enable navigation.\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/bryceautomation.com\\\/index.php\\\/2020\\\/08\\\/12\\\/plantpax-4-1-interlocks\\\/#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/bryceautomation.com\\\/index.php\\\/2020\\\/08\\\/12\\\/plantpax-4-1-interlocks\\\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/bryceautomation.com\\\/index.php\\\/2020\\\/08\\\/12\\\/plantpax-4-1-interlocks\\\/#primaryimage\",\"url\":\"https:\\\/\\\/bryceautomation.com\\\/wp-content\\\/uploads\\\/2020\\\/08\\\/adjustdescriptions.png\",\"contentUrl\":\"https:\\\/\\\/bryceautomation.com\\\/wp-content\\\/uploads\\\/2020\\\/08\\\/adjustdescriptions.png\",\"width\":851,\"height\":350},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/bryceautomation.com\\\/index.php\\\/2020\\\/08\\\/12\\\/plantpax-4-1-interlocks\\\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/bryceautomation.com\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"PlantPAx 4 Interlocks\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/bryceautomation.com\\\/#website\",\"url\":\"https:\\\/\\\/bryceautomation.com\\\/\",\"name\":\"Bryce Automation\",\"description\":\"Automating Home and Industry...\",\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/bryceautomation.com\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"en-US\"},{\"@type\":\"Person\",\"@id\":\"https:\\\/\\\/bryceautomation.com\\\/#\\\/schema\\\/person\\\/5d5b0f6f6ad768f1ee52968338e63af7\",\"name\":\"Ricky\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/bryceautomation.com\\\/wp-content\\\/wphb-cache\\\/gravatar\\\/a8f\\\/a8fe6bf79d292b388ffee281ccb12488x96.jpg\",\"url\":\"https:\\\/\\\/bryceautomation.com\\\/wp-content\\\/wphb-cache\\\/gravatar\\\/a8f\\\/a8fe6bf79d292b388ffee281ccb12488x96.jpg\",\"contentUrl\":\"https:\\\/\\\/bryceautomation.com\\\/wp-content\\\/wphb-cache\\\/gravatar\\\/a8f\\\/a8fe6bf79d292b388ffee281ccb12488x96.jpg\",\"caption\":\"Ricky\"},\"sameAs\":[\"http:\\\/\\\/bryceautomation.com\",\"https:\\\/\\\/www.facebook.com\\\/ricky.bryce.7\",\"https:\\\/\\\/www.linkedin.com\\\/in\\\/ricky-bryce-4367a416\\\/\"],\"url\":\"https:\\\/\\\/bryceautomation.com\\\/index.php\\\/author\\\/ricky\\\/\"}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"PlantPAx 4 Interlocks (P_Intlk Instruction) - Bryce Automation","description":"We will add an PlantPAx 4 Interlocks to the ControlLogix processor, the Faceplates in FactoryTalk View SE, and enable navigation.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/bryceautomation.com\/index.php\/2020\/08\/12\/plantpax-4-1-interlocks\/","og_locale":"en_US","og_type":"article","og_title":"PlantPAx 4 Interlocks (P_Intlk Instruction) - Bryce Automation","og_description":"We will add an PlantPAx 4 Interlocks to the ControlLogix processor, the Faceplates in FactoryTalk View SE, and enable navigation.","og_url":"https:\/\/bryceautomation.com\/index.php\/2020\/08\/12\/plantpax-4-1-interlocks\/","og_site_name":"Bryce Automation","article_author":"https:\/\/www.facebook.com\/ricky.bryce.7","article_published_time":"2020-08-12T13:20:07+00:00","article_modified_time":"2020-11-15T16:37:56+00:00","og_image":[{"width":851,"height":350,"url":"https:\/\/bryceautomation.com\/wp-content\/uploads\/2020\/08\/adjustdescriptions.png","type":"image\/png"}],"author":"Ricky","twitter_card":"summary_large_image","schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/bryceautomation.com\/index.php\/2020\/08\/12\/plantpax-4-1-interlocks\/#article","isPartOf":{"@id":"https:\/\/bryceautomation.com\/index.php\/2020\/08\/12\/plantpax-4-1-interlocks\/"},"author":{"name":"Ricky","@id":"https:\/\/bryceautomation.com\/#\/schema\/person\/5d5b0f6f6ad768f1ee52968338e63af7"},"headline":"PlantPAx 4 Interlocks","datePublished":"2020-08-12T13:20:07+00:00","dateModified":"2020-11-15T16:37:56+00:00","mainEntityOfPage":{"@id":"https:\/\/bryceautomation.com\/index.php\/2020\/08\/12\/plantpax-4-1-interlocks\/"},"wordCount":649,"commentCount":3,"image":{"@id":"https:\/\/bryceautomation.com\/index.php\/2020\/08\/12\/plantpax-4-1-interlocks\/#primaryimage"},"thumbnailUrl":"https:\/\/bryceautomation.com\/wp-content\/uploads\/2020\/08\/adjustdescriptions.png","keywords":["P_Intlk","PlantPAx"],"articleSection":["PlantPAx"],"inLanguage":"en-US","potentialAction":[{"@type":"CommentAction","name":"Comment","target":["https:\/\/bryceautomation.com\/index.php\/2020\/08\/12\/plantpax-4-1-interlocks\/#respond"]}]},{"@type":"WebPage","@id":"https:\/\/bryceautomation.com\/index.php\/2020\/08\/12\/plantpax-4-1-interlocks\/","url":"https:\/\/bryceautomation.com\/index.php\/2020\/08\/12\/plantpax-4-1-interlocks\/","name":"PlantPAx 4 Interlocks (P_Intlk Instruction) - Bryce Automation","isPartOf":{"@id":"https:\/\/bryceautomation.com\/#website"},"primaryImageOfPage":{"@id":"https:\/\/bryceautomation.com\/index.php\/2020\/08\/12\/plantpax-4-1-interlocks\/#primaryimage"},"image":{"@id":"https:\/\/bryceautomation.com\/index.php\/2020\/08\/12\/plantpax-4-1-interlocks\/#primaryimage"},"thumbnailUrl":"https:\/\/bryceautomation.com\/wp-content\/uploads\/2020\/08\/adjustdescriptions.png","datePublished":"2020-08-12T13:20:07+00:00","dateModified":"2020-11-15T16:37:56+00:00","author":{"@id":"https:\/\/bryceautomation.com\/#\/schema\/person\/5d5b0f6f6ad768f1ee52968338e63af7"},"description":"We will add an PlantPAx 4 Interlocks to the ControlLogix processor, the Faceplates in FactoryTalk View SE, and enable navigation.","breadcrumb":{"@id":"https:\/\/bryceautomation.com\/index.php\/2020\/08\/12\/plantpax-4-1-interlocks\/#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/bryceautomation.com\/index.php\/2020\/08\/12\/plantpax-4-1-interlocks\/"]}]},{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/bryceautomation.com\/index.php\/2020\/08\/12\/plantpax-4-1-interlocks\/#primaryimage","url":"https:\/\/bryceautomation.com\/wp-content\/uploads\/2020\/08\/adjustdescriptions.png","contentUrl":"https:\/\/bryceautomation.com\/wp-content\/uploads\/2020\/08\/adjustdescriptions.png","width":851,"height":350},{"@type":"BreadcrumbList","@id":"https:\/\/bryceautomation.com\/index.php\/2020\/08\/12\/plantpax-4-1-interlocks\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/bryceautomation.com\/"},{"@type":"ListItem","position":2,"name":"PlantPAx 4 Interlocks"}]},{"@type":"WebSite","@id":"https:\/\/bryceautomation.com\/#website","url":"https:\/\/bryceautomation.com\/","name":"Bryce Automation","description":"Automating Home and Industry...","potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/bryceautomation.com\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"en-US"},{"@type":"Person","@id":"https:\/\/bryceautomation.com\/#\/schema\/person\/5d5b0f6f6ad768f1ee52968338e63af7","name":"Ricky","image":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/bryceautomation.com\/wp-content\/wphb-cache\/gravatar\/a8f\/a8fe6bf79d292b388ffee281ccb12488x96.jpg","url":"https:\/\/bryceautomation.com\/wp-content\/wphb-cache\/gravatar\/a8f\/a8fe6bf79d292b388ffee281ccb12488x96.jpg","contentUrl":"https:\/\/bryceautomation.com\/wp-content\/wphb-cache\/gravatar\/a8f\/a8fe6bf79d292b388ffee281ccb12488x96.jpg","caption":"Ricky"},"sameAs":["http:\/\/bryceautomation.com","https:\/\/www.facebook.com\/ricky.bryce.7","https:\/\/www.linkedin.com\/in\/ricky-bryce-4367a416\/"],"url":"https:\/\/bryceautomation.com\/index.php\/author\/ricky\/"}]}},"_links":{"self":[{"href":"https:\/\/bryceautomation.com\/index.php\/wp-json\/wp\/v2\/posts\/2590","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/bryceautomation.com\/index.php\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/bryceautomation.com\/index.php\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/bryceautomation.com\/index.php\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/bryceautomation.com\/index.php\/wp-json\/wp\/v2\/comments?post=2590"}],"version-history":[{"count":0,"href":"https:\/\/bryceautomation.com\/index.php\/wp-json\/wp\/v2\/posts\/2590\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/bryceautomation.com\/index.php\/wp-json\/wp\/v2\/media\/2615"}],"wp:attachment":[{"href":"https:\/\/bryceautomation.com\/index.php\/wp-json\/wp\/v2\/media?parent=2590"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/bryceautomation.com\/index.php\/wp-json\/wp\/v2\/categories?post=2590"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/bryceautomation.com\/index.php\/wp-json\/wp\/v2\/tags?post=2590"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}