Numeric Input

Numeric Input for a Timer

Introduction to Numeric Input for a Timer In this section, we’ll discuss how to set up a Numeric Input for a Timer in ControlLogix. I’ll use FactoryTalk View ME. As you know, the time base for timers in ControlLogix is in Milliseconds. This is not very intuitive for an operator. […]


FactoryTalk View Numeric Input 4

Introduction to FactoryTalk View Numeric Input In this section, we will discuss the FactoryTalk View Numeric Entry (cursor point) object.    The purpose of the numeric input is to allow the operator to enter values into the processor.   This could be the speed set-point of a  drive, a temperature set-point, or […]

Select Numeric Input