Introduction to Programming PAL-1 With RC2014 In this section, we’ll set up communication for Programming the PAL-1 With an RC2014. Obviously, you can use a modern computer to program your PAL-1, or even it’s keypad. However, programming a vintage computer with another vintage processor gives you more of a vintage Read More »
Introduction: Connecting to the PAL-1 Computer When Connecting to the PAL-1 Computer, we need a straight serial cable. That is to say, pin 2 on one end of the cable connects to pin 2 on the other end. Pin 3 on one end, connects to pin 3 on the other Read More »
Introduction to the PAL-1 6502 Computer The PAL-1 6502 Computer is a clone of the KIM-1 Computer. In fact, most programs that will run on the KIM-1 will run on the PAL-1. I recently purchased this kit from Tindie. You can find the manuals here. This kit takes a day Read More »
